Installation |
sudo apt-get update && sudo apt-get upgrade -y && sudo apt-get autoremove -y && sudo apt-get autoclean -y
|
|
sudo apt install unbound
|
|
wget https://www.internic.net/domain/named.root -qO- | sudo tee /var/lib/unbound/root.hints
|
|
|
|
Configuration |
sudo nano /etc/unbound/unbound.conf.d/pi-hole.conf
|
|
server:
# If no logfile is specified, syslog is used
# logfile: "/var/log/unbound/unbound.log"
verbosity: 1
statistics-interval: 30
extended-statistics: yes
statistics-cumulative: no
interface: 127.0.0.1
port: 5335
do-ip4: yes
do-udp: yes
do-tcp: yes
# May be set to yes if you have IPv6 connectivity
do-ip6: no
# You want to leave this to no unless you have *native* IPv6. With 6to4 and
# Terredo tunnels your web browser should favor IPv4 for the same reasons
prefer-ip6: no
# Use this only when you downloaded the list of primary root servers!
# If you use the default dns-root-data package, unbound will find it automatically
root-hints: "/var/lib/unbound/root.hints"
# Trust glue only if it is within the server's authority
harden-glue: yes
# Require DNSSEC data for trust-anchored zones, if such data is absent, the zone becomes BOGUS
harden-dnssec-stripped: yes
# Don't use Capitalization randomization as it known to cause DNSSEC issues sometimes
# see https://discourse.pi-hole.net/t/unbound-stubby-or-dnscrypt-proxy/9378 for further details
use-caps-for-id: no
# Reduce EDNS reassembly buffer size.
# Suggested by the unbound man page to reduce fragmentation reassembly problems
edns-buffer-size: 1472
# Perform prefetching of close to expired message cache entries
# This only applies to domains that have been frequently queried
prefetch: yes
# One thread should be sufficient, can be increased on beefy machines. In reality for most
# users running on small networks or on a single machine, it should be unnecessary to seek
# performance enhancement by increasing num-threads above 1.
num-threads: 1
# Ensure kernel buffer is large enough to not lose messages in traffic spikes
so-rcvbuf: 4m
# Ensure privacy of local IP ranges
private-address: 192.168.0.0/16
private-address: 169.254.0.0/16
private-address: 172.16.0.0/12
private-address: 10.0.0.0/8
private-address: fd00::/8
private-address: fe80::/10
forward-zone:
name: "."
forward-addr: 1.1.1.1
forward-addr: 1.0.0.1
# enable remote-control
remote-control:
control-enable: yes
control-port: 8953
server-key-file: "/etc/unbound/unbound_server.key"
server-cert-file: "/etc/unbound/unbound_server.pem"
control-key-file: "/etc/unbound/unbound_control.key"
control-cert-file: "/etc/unbound/unbound_control.pem"
|
|
sudo service restart unbound
|
|
|
|
Now test that it is working! |
|
dig sigfail.verteiltesysteme.net @127.0.0.1 -p 5335
|
|
dig sigok.verteiltesysteme.net @127.0.0.1 -p 5335
|
|
|
|
Configuration on PiHole |
|
|
|
|
Other Commands |
|
sudo systemctl status unbound
|
|
sudo systemctl enable unbound
|
|
sudo systemctl restart unbound
|
|
sudo snap install unbound-telemetry
|
|
|
|
Documentation |
|
Unbound Documentation |
|
Pi-hole / Unbound Documentation |